22-01-2013, 20:32
|
|
|
חבר מתאריך: 04.08.09
הודעות: 1,313
|
|
אם הבנתי נכונה את דברייך...
במקרה שהמייצב משמש כמקור זרם אין צורך בקבל ביציאה למרות שהמייצב הינו מסוג LDO ובדפי הנתונים כתוב שיש לשים קבל ביציאה.
איך אני יכול לדעת או מה לבדוק בדפי הנתונים בכדי להחליט האם אני צריך קבל ביציאה במקרה שהמייצב משמש כמקור זרם ?
1.3 Output Capacitor
The output capacitor is critical in maintaining regulator stability,
and must meet the required conditions for both minimum
amount of capacitance and ESR (Equivalent Series
Resistance). The minimum output capacitance required by
the LM1117 is 10μF, if a tantalum capacitor is used. Any
increase of the output capacitance will merely improve the
loop stability and transient response.
_____________________________________
טרנזיסטור
נערך לאחרונה ע"י מרק10 בתאריך 22-01-2013 בשעה 20:34.
|