22-05-2005, 21:43
|
|
|
חבר מתאריך: 10.10.03
הודעות: 229
|
|
הנה הפרטים של הלוח שלי ושל הUSB
SiSoftware Sandra
System
Manufacturer : VIA Technologies, Inc.
Model : P4X266-8233
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
Mainboard
Manufacturer : PC Partner
MP Support : No
Model : P4X266-8233
Version : V1.XX
System BIOS : 12/05/2001-P4X266-8233-6A6LWPRXC-00
Chipset : VIA P4X266/A
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 768MB
Bank0/1 - A0 : Empty
Bank2/3 - A1 : Empty
Bank4/5 - A2 : DIMM 256MB
Chipset 1
Model : VIA Technologies Inc VT8753 Apollo P4X266 System Controller
Bus(es) : ISA AGP PCI USB i2c/SMBus
Front Side Bus Speed : 4x 100MHz (400MHz data rate)
Maximum FSB Speed / Max Memory Speed : 4x 100MHz / 1x 133MHz
Width : 64-bit
IO Queue Depth : 8 request(s)
Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 66MHz (264MHz data rate)
IO Queue Depth : 9 request(s)
Logical/Chipset 1 Memory Banks
Bank 4 : 256MB SDRAM 3-3-3-7CL
Bank Interleave : 4-way
Speed : 1x 133MHz (133MHz data rate)
Multiplier : 4/3x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 3 : 256MB 8x(32Mx8) SDRAM PC133U-333-5412 (CL3 up to 133MHz) (CL2 up to 100MHz)
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 36.0°C / 96.8°F
CPU Temperature : 27.0°C / 80.6°F
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 3125rpm
Voltage Sensor(s)
CPU Voltage : 1.76V
Aux Voltage : 2.66V
+3.3V Voltage : 3.31V
+5V Voltage : 5.24V
+12V Voltage : 11.86V
-12V Voltage : -12.03V
-5V Voltage : 1.98V
Standby Voltage : 2.63V
Battery Voltage : 3.06V
AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 66MHz (264MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : Yes
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/3x
LPC Hub Controller 1
Model : VIA Technologies Inc VT8233 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz
USB Controller 1
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (VIA Technologies Inc VT8633 Apollo Pro 266 CPU to AGP Controller)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Used
PCI4 (5h) : PCI 32-bit +5V PME Full-Length Used
PCI5 (6h) : PCI 32-bit +5V PME Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Available (Yuan Yuan Enterprise Co Ltd Radeon 9200 SE Series (RV280))
Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB : USB - None / None
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
של הUSB
SiSoftware Sandra
General Information
Controller : VIA Rev 5 or later USB Universal Host Controller
Root Hub
Compound Device : No
Hub Is Bus Powered : No
Power Switching : None
Over-current Protection : None
Number of Ports : 2
Root Hub: USB Port 1
Status : No Device Connected
Root Hub: USB Port 2
Status : No Device Connected
אם אתם מבינים משהו עזרו בבקשההה
נערך לאחרונה ע"י infected15 בתאריך 22-05-2005 בשעה 21:46.
|